Contents
GD-463D10U
GD-463D10E
3D LCD MONITOR
First things first!
INSTRUCTIONS
z Remote control.................................. 6
z Names and functions of parts ........... 7
Getting started
Let’s try it out
Try the advanced features
z Useful functions .............................. 14
z Customising your monitor ............... 17
Picture............................................ 17
Features (sub menu)...................... 18
Sound............................................. 19
Features......................................... 20
Set Up............................................ 21
Just the way you like it
When you have trouble
z Troubleshooting .............................. 23
z Technical information ...................... 25
z Specifications.................................. 26
LCT2574-001A-H
z Do not install this product in the following places:
– in a damp or dusty room
– where the product is exposed to soot or steam, such as near the
cooking counter or a humidifier
z Slots and openings in the cabinet are provided for ventilation. These
ensure reliable operation of the product and protect it from overheating.
These openings must not be blocked or covered.
z Never push objects of any kind into this product through openings as
which could result in a fire or electric shock.
z Never spill liquid of any kind on the product.
z Never place anything on the product. (Placing liquids, naked flames,
cloths, paper, etc. on the product may cause a fire.)
– near heat sources
– where condensation easily occurs, such as near the window
z Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious injury to a child or adult, and serious
damage to the product.
The product should be mounted according to the manufacturer’s
instructions, and should use a mount recommended by the
manufacturer.
z Do not apply any strong shock to the LCD panel. (Do not hit any object
against it or push it with a sharp-pointed tool.)
z Do not put heavy objects on the product.
z Do not step on or hang on the product.
z Do not use this product near water.
z Be sure to install the product in the place where proper temperature and
humidity are kept (See “Operating conditions” on page 26).
This product becomes hot during its use. Take enough care when
handling the product.
U.S.A. only
FCC NOTICE (U.S.A. only)
CAUTION:
Changes or modifications not approved by JVC could void the user’s
authority to operate the equipment.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltages and other hazards. Refer
all service to qualified service personnel.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
z Do not use the product for a long time if the sound is distorted.
z Never listen to headphones at high volume, it may damage your
hearing.
z Make enough room for inserting or removing the power plug. Place the
product as close to an AC outlet as possible. The main power supply for
the product is controlled by inserting or removing the power plug.
z When the product is left unattended and unused for a long period of
time, unplug it from the wall outlet and disconnect the cable system.
z Do not overload wall outlets, extension cords, or convenience
receptacles on other equipment as this can result in a risk of fire or
electric shock.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
2
Safety Precautions
3
U.S.A. only
14)Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15)Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
16)Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal of
these materials may be regulated in your community due to environmental
considerations. For disposal or recycling information, please contact your
local authorities or for USA, the Electronic Industries Alliance:
17)When discarding batteries, environmental problems must be considered
and the local rules or laws governing the disposal of these batteries must
be followed strictly.
18)Avoid improper installation and never position the unit where good
ventilation is impossible. When installing this monitor, distance
recommendations must be maintained between the set and the wall, as
well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
200 (7 7/8)
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
150 (6)
50 (2)
Unit: mm (inch)
150 (6) 50 (2)
19)When this monitor is connected to the wall outlet, it is always on standby
even when all the LED lamps are not lit. To shut down the monitor, unplug
the monitor from the wall outlet.
10)Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/ apparatus combination to avoid injury
from tip-over.
13)Unplug this apparatus during lightning storms or when
unused for long periods of time.
European Union only
Dear Customer,
This apparatus is in conformance with the valid European directives and
standards regarding electromagnetic compatibility and electrical safety.
Information for Users on Disposal of Old Equipment
and Batteries
[European Union]
European representative of Victor Company of Japan, Limited is:
These symbols indicate that the electrical and electronic equipment
and the battery with this symbol should not be disposed of as
general household waste at its end-of-life. Instead, the products
should be handed over to the applicable collection points for the
recycling of electrical and electronic equipment as well as batteries
for proper treatment, recovery and recycling in accordance with your
national legislation and the Directive 2002/96/EC and 2006/66/EC.
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
By disposing of these products correctly, you will help to conserve
natural resources and will help to prevent potential negative effects
Products
on the environment and human health which could otherwise be
caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these
products, please contact your local municipal office, your household
waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page
Battery
the product.
Notice:
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance
with applicable national legislation or other rules in your country for
the treatment of old electrical and electronic equipment and batteries.
The sign Pb below
the symbol for
batteries indicates
that this battery
contains lead.
4
Safety Precautions
5
Maintenance
Unplug this product from the wall outlet before cleaning.
Screen
To avoid irreparable change in appearance of the screen such as uneven
color, discoloration, scratches, be careful about the following:
z Do not paste or stick anything using any glues or adhesive tapes.
z Do not write anything on the screen.
z Do not strike the screen with a hard object.
z Avoid condensation on the screen.
z Do not wipe the screen with any liquid such as water. In addition, wiping
the screen with water-diluted neutral detergent or solvent such as alcohol,
thinner, or bezine may affect the anti-reflection treatment of the screen.
z Do not wipe the screen forcefully.
If the screen gets stained, wipe it with a soft dry cloth.
Cabinet
To avoid the deterioration or damages of the cabinet such as its paint's
peeling away, be careful about the following:
z Do not wipe the cabinet using solvent such as alcohol, thinner, or benzine.
z Do not expose the cabinet to any volatile substance such as insecticides.
z Do not allow any rubber or plastic in contact for a long time.
z Do not wipe the cabinet forcefully.
Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily
stained, wipe it with a soft cloth soaked in water-diluted neutral detergent and
wrung well, then wipe with a soft dry cloth.
See “Handling the glossy finish of the monitor” (P. 8) on how to handle the
glossy finish.
Ventilation openings
Use a vacuum cleaner to get rid of the dust around the intakes (all the
openings). If a vacuum cleaner is not available, use a cloth and wipe it off.
Leaving the dust around the intakes may prevent proper temperature control
and cause damage to the product.
Glasses
If the glasses get stained, wipe it with a soft dry cloth.
Remote control
Mute
Turn on / off (standby) the monitor
Enter number
2%452. ꢁ
#LEAR 3$
Turn on “Clear SD” (P. 18)
Color buttons
Display on-screen menu (P. 17)
Switch between “TV / STB / DVD / AUDIO” (P. 15)
Switch between VIDEO devices
Select and confirm settings in menus
CH
46ꢀ6)$%/
Change external input
To the previous screen
Volume control / Turn off muting
Display current input information
TOP MENU
CH
MODE
$)30,!9
ZOOM
Change the aspect ratio (P. 14)
Turn on “Sound Effect” (P. 14)
Select a 3D mode (P. 12)
Select a picture mode (P. 14)
Note
z If the remote control doesn’t
work, confirm that the mode is
set to “TV”.
LCD
z For buttons that can be used to operate other devices, refer to
“Configuring your remote control” (P. 15).
z Buttons that are not explained in this manual does not function
with this monitor.
6
7
Names and functions of parts
Touch sensor panel operation
Change external
input.
Volume
Turn on / off (standby)
the monitor.
Remote control
sensor
Power lamp
ON: Lit (Blue)
OFF: Unlit
z When “Power Lamp” is set to “Off”,
the power lamp will not light up.
g“Power Lamp” (P. 20)
Menu operation.
Switch to an external input. (P. 13)
z Touching
and
simultaneously switches the
monitor to 3D mode.
Ⅵ Touch on the function name to operate the function
Note
z You will hear a beep if you have touched
the button correctly.
Peel off the protection films pasted on the glossy finish of the monitor after
the monitor has been placed properly. (P. 8)
VOL
Change the direction of monitor
Ⅵ Operate the menus
Use as “MENU” button or “OK” button.
CH
Use as “ ” and “ ” buttons.
VOL
Use as “ ” and “ ” buttons.
z For details on menu operations, refer to “Customising your monitor”
(P. 17).
Note
Attach the stand to the monitor
z When the stand is not used:
1
Seal up the two holes at the bottom of the TV using
the plates provided. Peel off the protection films on
the plates. Then peel the plates from the paper and
stick them on the holes.
Handling the glossy finish of the monitor
Be careful when handling the glossy finish of the monitor
The glossy finish of the monitor scratches easily.
z Protection films have been pasted onto the glossy finish of the monitor to
prevent scratches. Peel off the films after the monitor has been placed
properly.
z If the glossy finish gets dirty, clear the dust off the glossy finish first. Then
wipe softly with the cleaning cloth provided. If you do not clear the dust
first, or you wipe the glossy finish too hard, or a cleaning cloth other than
the one provided is used, the glossy finish may be scratched.
To prevent scratches on the panel, lay a piece of soft cloth on an even
platform and place the monitor onto it.
2
Glossy finish
8
9
Getting started
Please read P. 10 of this manual to set up your monitor.
Check accessories
Install your monitor
Remote control
Follow the instructions on page 8 to attach the stand provided to the monitor.
z Place the monitor on a flat and stable location.
Ⅵ Power requirements
“AAA/R03” Batteries
(For confirming the
monitor works)
z Connect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.
Cleaning cloth
(For details on using the
cleaning cloth, see P. 8.)
Ⅵ Installation requirements
z To prevent the monitor from falling, thread the belt through the hole on the
back of the stand and secure it to the rack, etc.
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Hole
Circularpolarizing glasses
(x2)
(For viewing 3D images)
z Stand, stand cover, screws and plates are also included. For details, refer
to page 8.
Belt and screw (not provided)
Insert the batteries
Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end,
making sure the + and - polarities are correct.
Watching videos
VIDEO-1
Connecting your external devices
Output j
Input h
• Composite signal /
Component signal
(P. 27)
Make sure all the devices and the monitor are turned off.
You can connect many different devices to the rear panel of the monitor.
Please read the user manuals of each device before setting up.
(Connecting cables are not supplied with this monitor.)
• Sound L / R
z
Use component signal
g “VIDEO Setting” (P. 21)
g: signal direction
Component input
Composite input
Watching videos
VIDEO-2
Output j
Input h
• Composite signal /
S-VIDEO
Headphones
• Sound L / R
z
If both composite and S-VIDEO cables
are connected, S-VIDEO input takes
priority over composite inputs.
HDMIீConnector
HDMI-1 HDMI-2 HDMI-3
Game
Video
consoles camera
HDMI-1
HDMI-2
HDMI-3
B
Connecting HDMI
devices
DVD Player
A
VCR
Not available.
(For service adjustments)
C
Output j
Input h
• HDMI signal (P. 27)
z
z
“HDMI-1 Audio Setting” g (P. 21)
HDMI-2 and HDMI-3 inputs do not support
analog sound.
HD Video
camera
HDMI-1
Pb
L
Pr
R
Y
V
Digital Satellite
OUTPUT
L
broadcast tuner
Video and sound signals of a monitor channel
you are viewing output from these terminals
DVD player
R
R
L
L
V
R
Output j
• Composite signal
• Sound L / R
DVD player
(HDMI compatible)
Video
camera
Game
consoles
S-VIDEO
V
OUTPUT
To VIDEO-2
Ⅵ DVI devices
g“Connect DVI devices”
(P. 25)
PC input line in
PC AUDIO
PC IN
(D-SUB)
PC
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Note
z To reduce noise, use a VGA cable with core filters.
10
11
Viewing 3D images
This product is a 3D LCD Monitor which adopts the Xpol®*1 circular polarizing
method. You can enjoy 3D stereoscopic content by using the supplied
circular polarizing glasses.
When viewing in 3D
z To view in 3D, input the 3D images and press the “3D” button to change to
a suitable mode before putting on the circular polarizing glasses to view
the 3D images.
*1: Xpol® is a registered trademark of Arisawa Manufacturing Co., Ltd.
z Every individual will have a different experience when viewing 3D images.
Viewing at a close distance may cause disorders and discomfort; it is
recommended to view at a distance of about 2 m (6 feet) from the front of
the screen.
z The 3D effects may differ when viewing the screen from different angles.
z Stop using the product and rest immediately if you experience eyestrain,
dizziness, vomiting, headaches or any other discomforts. Take periodic
breaks and rest even if you do not experience any discomfort.
z If the symptoms persist even after resting, please consult a doctor.
z For users with past experiences of PSS (Photo Sensitive Seizure) or users
with heart problems, please consult a doctor before using this monitor.
z For infants still in the visual development stage, please consult a doctor
and have an adult guardian accompany the child.
Basic 3D principle
By having a filter of different polarization on every alternate scan line on the
monitor, and projecting the left eye image (left circular polarization) and the
right eye image (right circular polarization) through the filters, users can
enjoy a realistic three dimensional view by viewing the left and right images
simultaneously through the circular polarizing glasses.
As the left and right images are always displayed together on the screen,
users can view flicker-free 3D images.
Cautions on using the circular polarizing glasses
z Use the circular polarizing glasses only when viewing 3D images.
z Use only the circular polarizing glasses provided.
z For users who wear spectacles, cover the spectacles with the circular
polarizing glasses.
z Do not use the circular polarizing glasses as sunglasses.
z Please consult a doctor if allergies appear on the areas that come into
contact with the circular polarizing glasses.
Note
z For purchase of additional circular polarizing glasses, please contact the
dealer where you purchased your monitor.
To view 3D images
This monitor supports LINE BY LINE and SIDE BY SIDE 3D signals. To view
3D images, input a compatible 3D signal to enjoy the 3D effects.
For non-compressed side-by-side
3D input
SIDE BY SIDE 2
You can activate the 3D mode using the following method.
Touch
and
on the touch sensor panel (P. 7)
simultaneously.
OR
Press the “3D” button on remote control. (P. 6)
Left screen
Right screen
Monitor screen
SIDE BY SIDE 1
SIDE BY SIDE 2
LINE BY LINE
Input signal
For line-by-line 3D input and normal
2D input.
LINE BY LINE
Note
z 2D to 3D image conversion function is not available.
z When using SIDE BY SIDE to view 3D images, screen displays such as
menu screen will appear either on the left or right side of the screen. If you
cannot see the screen clearly, remove your circular polarizing glasses.
z Set the 3D/ZOOM mode to the following setting when viewing in 3D.
Input
HDMI
Format
1080p
Zoom Mode (P. 14)
LINE BY LINE,
SIDE BY SIDE 1/2
Full Native
Input signal
Monitor screen
HDMI,
Component
1080i
SIDE BY SIDE 1/2
Full Native
For horizontally compressed side-
by-side 3D input.
z If double vision occurs when viewing in 3D using the component inputs,
set the following items.
“Sharpness”: Minimum (P. 17)
SIDE BY SIDE 1
“Clear SD”, “Digital VNR”, “DigiPure”, “MPEG Noise Reduction”: “Off”
(P. 18)
Left screen
Right screen
Monitor screen
Input signal
12
13
Watching videos / DVDs
1 Select the video source
AV Select
AV Select
A select
B watch
1
2
3
4
5
6
VIDEO-1
VIDEO-2
HDMI1
HDMI2
HDMI3
PC
TV/VIDEO
E.g. For VIDEO-1
2
Operate the connected device and play a video
Ⅵ To operate using the monitor’s touch sensor panel
TV/VIDEO
1 Touch
2 Touch
3 Touch
and
to select
LCD
Useful functions
Zoom
Sound Effect
Change the aspect ratio
Enjoy the sound setting that you like
1
Sound Effect
Cinema Surround
MaxxBass
Off
Off
2 Select the aspect ratio
Zoom
A select
Auto
Regular
Panoramic
Cinema Surround (P. 19)
Enjoy ambient sound.
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
z “Cinema Surround” does not work with headphones.
B set
Full Native
Slim
Panoramic Zoom
MaxxBass (P. 19)
Compensates low frequencies to widen the frequency band.
CH
3
16:9 Zoom
Move the picture with S or T while this bar is displayed
Picture Mode (P. 17)
z When “Slim” is selected, a 4:3 image stretched out to 16:9 will
revert back to its original aspect ratio with black bands.
z When “Panoramic Zoom” is selected, a 4:3 image with black
bands will be stretched out to 16:9.
CH
You can select a preset picture setting according to the
brightness of your room or when playing video games.
z “Full Native” g “What is “Full Native”?” (P. 25)
z Using “Auto” g “Auto in “Zoom”” (P. 25)
Note
z Depending on the signal formats, some zoom modes will be
displayed in black and will not be selectable.
z If an image is displayed in an aspect ratio that differs from its
original aspect ratio, the image will be distorted or portions of
the image will be cut off.
LCD
14
15
Configuring your remote control
You can configure your monitor’s remote control to operate your
4 Set the remote control code.
other devices.
Configure your remote control.
1 Turn on the device manually.
Release the button
Press and hold
Enter four digit
number
2 Switch the remote control mode to a mode that
matches your device. Refer to the table below to
select an appropriate mode.
5 Point the remote control at your device, press
and confirm that your device is turned off. If your
device does not respond, try entering another
available code.
TV
STB
DVD
AUDIO
Note
z The indicator lights for 3 seconds each time the remote
control is operated.
z If none of the code works, refer to “Using the search code
function” (P. 16).
3 Find the remote control code for your JVC device
from the table below.
MODE Applicable devices
TV This monitor only
Remote control codes
STB Not in use
DVD
0503, 0539, 0623, 1241, 1550,
1602, 1701, 1860, 1863, 1940
DVD
DVD/DVD-R
1164, 1275, 1597
Home Theater in Box 0623, 1701, 1860, 1863, 1940
Receiver/Home
Theater in Box
0074,1374,1676, 2000, 2001
AUDIO
LCD
Button functions
Using the search code function
Ⅵ Change the remote control mode
This function searches through the codes one by one, beginning from the
first code in the list.
1 Turn on the device manually.
Ⅵ Turn on/off the device
Ⅵ Navigate the menus
2 Switch the remote control mode to a mode that matches
your device.
Select
OK
Display menu
Press
to select the mode.
DISPLAY
Back to
previous menu
Display top
menu
3 Activate the search code function.
Hold down and until the mode indicator blinks.
Ⅵ Playback / Record, etc.
Play
4 Point the remote control at your device and press
. If
Select a
chapter
MODE
TOP MENU
DISPLAY
there is no response, try the next code by pressing and
Forward
Rewind
press
again. Repeat the process until your device
MODE
turns off.
Stop
Pause
5 Press
to register the code.
The code is now set. Confirm that the mode indicator goes
out.
Record
Ⅵ Mute g Press “
”
Ⅵ Volume g Press “
”
Ⅵ If your monitor’s remote control still does not work even after using the
search code function, use your device’s own remote control. Some
models of JVC devices cannot be operated with this remote control.
Ⅵ Select a surround mode g Press “
”
z Depending on your device, some functions may not
be operable with this remote control.
LCD
16
17
Customising your monitor
1 Display the menu bar
Picture
Picture
Note
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Color
Standard
z “Sharpness” is not
available during HDMI
input.
2 Display the desired menu
select
Picture
Tint
White Balance
Features
Cool
Picture Mode
You can select a preset picture setting according to the
brightness of your room or when playing video games.
3 Change or adjust the setting
z The menu disappears
after one minute of
inactivity.
Ⅵ To the previous
screen
g
Picture
Bright
Soft
: in a fairly bright room
: in a dark room
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Color
Standard
Tint
Standard
: in a room with standard brightness
White Balance
Features
Cool
Game Mode : when playing video games
select
Ⅵ You can make further adjustments to the selected preset
“Picture Mode” to your liking.
change / adjust
Backlight
Contrast
Brightness
Sharpness
Color
Backlight brightness (Darker l Brighter)
Contrast (Lower l Higher)
LCD
Ⅵ To enter an item’s menu
Features
Clear SD
Digital VNR
DigiPure
Pull Down
Color Management
Picture Management
Smart Picture
Dynamic Backlight
MPEG Noise Reduction
Color System
select
Off
Off
Off
Auto
On
On
On
On
On
Brightness (Darker l Brighter)
Sharpness (Softer l Sharper)
Color (Lighter l Deeper)
Note
z Depending on the
situation (video
signal formats,
(E.g. Features)
Zoom
external inputs,
etc.), some items
will be displayed in
black color and will
not work. You will
not be able to
Tint
Tint (Reddish l Greenish) (NTSC only)
4 Close the menu
White Balance Color temperature (Warm / Mid / Cool)
Ⅵ To return to the default adjustments g (blue)
change their
g “Features (sub menu)” (P. 18)
Features
setting as well.
Features (sub menu)
Make it easier to view bright / dark pictures
(On / Off)
Picture
Management
Features
Note
Clear SD
Off
Off
Off
Auto
On
On
On
On
On
Digital VNR
z “Clear SD”, “Digital VNR”, “DigiPure”
and “MPEG Noise Reduction” are not
available during HDMI input.
z “Smart Picture” is not available when
“Picture Mode” is set to “Bright” (P. 17).
z “Clear SD”, “Digital VNR”, “DigiPure”,
“Pull Down”, “MPEG Noise Reduction”
and “Color System” are not available
when “AV Select” is set to “PC”. (P. 13)
DigiPure
Make it easier to view white areas (On / Off)
Smart Picture
Pull Down
Color Management
Picture Management
Smart Picture
Dynamic Backlight
MPEG Noise Reduction
Color System
Reduce the brightness of the backlight when
the screen is dark (On / Off)
Dynamic Backlight
Zoom
Reduce MPEG video noise (On / Off)
MPEG Noise
Reduction
When there is no color, change the color
system (PAL / SECAM / NTSC3.58 /
NTSC4.43 / Auto)
Color System
For clearer picture (Off / Mode-1 / Mode-2)
Clear SD
z When “Mode-1” or “Mode-2” is selected, “Digital VNR”, “DigiPure”,
“MPEG Noise Reduction” and “Picture Management” settings are not
available.
z Select “Auto” when watching videos etc.
Color System
PAL
Reduce noise
Digital VNR
On
: Maintain constant effect Off
level
: Function is turned off
: Function is turned off
Select a default aspect ratio for Auto in
“Zoom” (P. 14)
Zoom
For natural-looking outlines
DigiPure
Panoramic
Regular
14:9 Zoom
On
: When the picture loses Off
Zoom
Auto
Panoramic
sharpness
Regular
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
Full Native
Slim
Panoramic Zoom
16 : 9
4 : 3
14 : 9
For smooth cinema film
Pull Down
: Function is always on Off : Function is turned off
On
Auto : Turn on / off the function automatically
Maintain a natural color balance (On / Off)
Color Management
18
Customising your monitor
19
Sound
Sound
Bass
Treble
Balance
Cinema Surround
Auto Volume Control
MaxxBass
Off
Off
Off
Low tones (Weaker l Stronger)
High tones (Weaker l Stronger)
Bass
Treble
Speaker balance (Left stronger l Right
stronger)
Balance
Ambient sound (High / Low / Mono / Off)
Cinema Surround
z “Cinema Surround” does not work with headphones.
Auto Volume
Control
Turns down the volume automatically when
an excessive sound signal is input. (On / Off)
z “Auto Volume Control” does not work with headphones.
Compensates low frequencies to widen the
frequency band (Low / High / Off)
MaxxBass
z “MaxxBass” does not work with headphones.
MaxxBass is a registered trademark of Waves Audio Ltd. in the USA,
Japan and other countries.
Features
Features
Blue Back
Control Lock
Power Lamp
On
Off
On
Displays a blue screen and mutes the sound
when the signal is weak or absent (On / Off)
Blue Back
z “Blue Back” does not function when the 3D mode is set to
“SIDE BY SIDE 2”. (P. 12)
Disable the front control buttons on the
monitor. (On / Off)
Control Lock
Lights the power lamp (P. 7) while the monitor
is on (On / Off)
Power Lamp
20
Customising your monitor
21
Set Up
Ⅵ Adjust the position of the PC image
A select “PC Position”
Set Up
Video Setting
HDMI-1 Audio Setting
HDMI Mode Setting
PC Setting
PC Position
Auto
Note
B enter
z “PC Setting” is only available when
“AV Select” is set to “PC”. (P. 13)
A adjust
g “Setting video terminals” (P. 22)
VIDEO Setting
Set to “Digital” or “Auto” for HDMI devices,
or “Analog” or “Auto” for DVI devices. (Not
available for HDMI-2 and HDMI-3.)
HDMI-1 Audio
Setting
B set
(blue)
z Reset position g
For setting the HDMI input
If there is no picture displayed on the
screen, set “Mode” to “1” or “2”.
HDMI Mode Setting
HDMI Mode Setting
HDMI-1
Mode
HDMI-2
Mode
1
2
2
HDMI-3
Mode
For setting the PC input
PC Setting
PC Position:
PC Setting
PC Position
Adjust screen position
Phase
Pixel
Phase:
Sets the focus of the screen.
Pixel:
Adjusts the horizontal feature of the screen.
Switch between component and composite input
Pr/Pb/Y, V)
Setting video terminals
(
1 Display the “VIDEO Setting” menu
A Select “VIDEO-1”
B Set to component input
Display the menu
bar
Select “Set Up”
Select “VIDEO Setting”
VIDEO Setting
VIDEO Setting
select
A select
A select
(yellow)
VIDEO-1
DVD
VIDEO-1
DVD
VIDEO-2
SAT
VIDEO-2
SAT
B next
B next
Pr/Pb/Y
V
2 Select an input, and then proceed with setting
Ⅵ Return to composite input g Press “ ” (yellow) in B again.
VIDEO Setting
VIDEO-1
DVD
select
VIDEO-2
SAT
Edit names of connected devices (ID LIST)
A Show the name list
B Select a name from the list
A select
(blue)
B set
Ⅵ Clear the name g Select the blank space in the list
22
23
Troubleshooting
Problem
Actions
Remote control stops z Unplug monitor, several minutes later plug it
working
in again.
Aspect ratio changes
unintentionally
z Press “
” to return to your settings. (P. 14)
I can’t turn it on!
z Is the power cord
connected to the AC
outlet correctly?
PC screen alignment
is off
z Adjust “PC Setting”. (P. 21)
z LCD panels use fine dots (“pixels”) to display
images.
While more than 99.99% of these pixels
function properly, a very small number of
pixels may not light, or may light all the time.
Please understand that this is not a
malfunction.
Black or white dots
appear on the screen
The remote
control
z Change the “Picture Mode” setting. (P. 17)
z Unnatural color >>>
doesn’t work!
z Are the batteries
flat?
z Are you more than 7
meters (23 feet) away
from the monitor?
z Is the “MODE (TV, STB, DVD,
AUDIO)” set to “TV”?
Adjust “Color” and “Backlight”. (P. 17)
Check your “Color System”. (P. 18)
z Noise >>> Set to the following functions.
Picture Mode: Standard (P. 17)
Digital VNR: On (P. 18)
LCD
Poor picture quality
DigiPure: Off (P. 18)
z Dull picture >>> Set to the following
functions.
Picture Mode: Bright (P. 17)
Digital VNR: Off (P. 18)
DigiPure: On (P. 18)
Problem
Actions
Problem
Actions
z If the top of the image is distorted, check the
video signal quality itself.
z If movement appears unnatural when
receiving a signal from a DVD player etc.,
with 576p, change the output setting of the
external device to 576i.
z Check if the device is compliant with HDMI.
z Set “HDMI-1 Audio Setting” to “Digital” or
“Auto” for HDMI devices, or “Analog” or
“Auto” for DVI devices.
(Not available for HDMI-2 and HDMI-3.)
(P. 21)
Strange picture when
using an external
device
No sound
Poor sound
z Adjust “Bass” and “Treble”. (P. 19)
z Wait a little for the signal to stabilize when
switching the signal format for an HDMI
device.
Green and distorted
screen
z Audio signals received from HDMI-1, HDMI-2
and HDMI-3 cannot be sent to the OUTPUT
terminal.
No sound from the
audio component
z Set to the 3D mode or ZOOM mode. (P. 12)
z If the images are not displayed properly even
after switching the 3D/ZOOM mode, the 3D
signal may not be supported.
Images do not appear
as 3D or double
vision
z It is not a malfunction. Depending on the
situation, some function items will be
displayed in black color and will not work.
(P. 17)
Some functions do
not work
z Read the user manual of the connected
device and perform the following:
g Check if the output setting of the device is
correct.
g Change the signal format of the device to
other format.
Wrong screen size
z Use the cable marked with HDMI logo.
No picture, no sound
Picture noise or no
picture
z Set “HDMI Mode Setting” to “1” or “2”. (P. 21)
24
25
Technical information
What is “Full Native”?
PC signals that can be displayed
z With the full HD LCD display and “Full Native”, you can enjoy full native HD
when viewing on “Full”.
640 x 480 1024 x 768
z If the signal doesn’t
appear, check that the
vertical frequency on the
PC is set to “60Hz”.
Resolution
(VGA)
(XGA)
Vertical frequency (Hz)
60.0
60.0
Full
Full Native
Connect DVI devices
Connect a DVI device to HDMI-1 using DVI-HDMI conversion cable. Connect
analog sound output of the DVI device to L and R terminals in HDMI-1 (DVI
ANALOG AUDIO).
z Set “HDMI-1 Audio Setting” to “Analog” or “Auto” g (P. 21)
ANALOG AUDIO)).
* The illustrations are emphasised to make clear differences between “Full”
and “Full Native”.
z Dark bar or noise may appear at the edges of the screen when viewing in
“Full Native” for some videos. This is resulted from the signal itself, not due
to monitor malfunction.
Auto in “Zoom”
When “Auto” is selected in Zoom, the aspect ratio will turn to the ratio
obtained from the information the monitor received.
z The aspect ratio will turn to the ratio obtained from WSS (Wide Screen
Identification Signal), video signal, or control signal of the external devices.
Without receiving the aspect information, it will be the setting in “Zoom”.
(P. 18)
Specifications
Main unit
GD-463D10U / GD-463D10E
Model
Power requirements
AC 100 V - 240 V, 50 Hz / 60 Hz
Audio output (Rated power output) 10 W + 10 W
Speakers
(4.5 cm x 13 cm) x 2
Power consumption
[standby]
210 W
[0.5 W]
Screen size (visible area size
measured diagonally)
116.8 cm
Headphone jack
Stereo mini jack (3.5 mm in diameter) x 1
Temperature: 0°C – 40°C (32°F – 104°F)
Operating conditions
Relative humidity: 20% – 80% (non-condensation)
(Slightly variable depending on ambient conditions for installation.)
Dimensions (W x H x D)
[without stand]
1071 mm (42 1/4") x 725 mm (28 5/8") x 275 mm (10 7/8")
[1071 mm (42 1/4") x 680 mm (26 7/8") x 74.5 mm (3")]
Weights
[without stand]
26.9 kg (59.18 lbs)
[22.9 kg (50.38 lbs)]
Accessories
(See “Check accessories”, P. 9)
PAL, SECAM, NTSC 3.58/4.43 MHz
16:9 (Wide format)
Color systems
Aspect ratio
LCD panel type
Effective screen size (W x H)
46 inch wide, active matrix TFT
1018 mm (41") x 573 mm (23")
Number of pixels displayed (panel) 1920 (H) x 1080 (V)
Number of colors displayed
Contrast ratio (typ.)
16.7 million
2000:1
26
Specifications
27
Terminals / Connectors
Terminal type Signal type (IN)
Terminal name
Signal type (OUT)
Composite video,
Analog component
VIDEO-1
RCA connectors x 6
480/60i, 576/50i, 480/60p, 576/50p,
720/60p, 720/50p, 1080/60i, 1080/50i
Audio L / R
VIDEO-2
HDMI-1
RCA connectors x 3
S-VIDEO connector x 1
Composite video, S-Video, Audio L / R
HDMI
480/60i, 576/50i, 480/60p, 576/50p,
720/60p, 720/50p, 1080/60i, 1080/50i,
1080/60p, 1080/50p, 1080/24p
Input terminals
HDMI-2
HDMI-3
HDMI connector x 1
HDMI-1 (DVI
RCA connectors x 2
D-SUB (15 pins) x 1
Audio L / R
ANALOG AUDIO)
Analog PC signal
VGA/60, XGA/60
PC INPUT
Stereo mini-jack x 1 (3.5 mm in
diameter)
PC AUDIO
OUTPUT
Audio L / R
RCA connectors x 3
Composite video, Audio L / R
Headphone output
Output terminals
Stereo mini-jack x 1 (3.5 mm in
diameter)
Headphone
z We may change the design and specifications without notice.
Unit: mm (inch)
Dimensions
<Front view>
<Side view>
<Rear view>
74.5 (3)
VESA mounting holes
(Size: 4-M6,
depth: 15 mm)
1071 (42 1/4)
39.5 (1 5/8)
400 (15 3/4)
450 (17 3/4)
275 (10 7/8)
Note
z The adjustable angle of the monitor screen from side to side is 20 degrees.
28
© 2009 Victor Company of Japan, Limited
0509SKH-SW-MT
|